8.2
Safety instructions for cleaning
Cleaning
To ensure problem-free machine cooling, the air ducts (ventilation grilles, channels,
cooling fins, tubes) must be free of pollution.
WARNING
Risk of explosion when cleaning with compressed air
If you clean the machine with compressed air, plastic components may become
statically charged and ignite a potentially explosive atmosphere; an explosion can
occur. This can result in death, serious injury or material damage.
Do not use compressed air to clean motors when installed in hazardous zones!
•
8.3
Stoppages
Longer non-operational periods
Note
For longer non-operational periods (> 1 month), either operate the machine or at
•
least turn the rotor regularly, approximately once per month.
Please refer to the section "Switching on" before switching on to recommission
•
the motor.
Remove any machine rotor locking devices before you turn the rotor.
•
NOTICE
Restricted motor function
If not used for longer periods of time, material damage or complete motor failure
can occur.
If the motor is out of service for a period of more than 12 months, then
environmental effects can damage the motor.
Apply suitable corrosion protection, preservation, packing and drying measures.
•
Switching on the anti-condensation heater
Switch on any anti-condensation heating while the machine is not being operated.
Taking the machine out of service
Details regarding the necessary measures, Chapter Preparing for use (Page 89).
Explosion-protected machines
56100000002002, 01/2016
Operation
129