Philips 7000PHB Instructions For Use Manual page 10

3. Continue to hold down the Message button on your Home
Communicator. With your other hand, press the Help Button until you
hear a long beep and a voice announcement saying: "Your Lifeline Help
Button is now auto-learned and ready to use." This will indicate that
the Help Button is working with the Home Communicator.
4. After you've heard the announcement, release the Help Button.
5. Repeat steps 3 and 4 to reprogram all the other Help Buttons in your
home. Then, release the Message button on the Home Communicator.
The Home Communicator will announce: "Please press the flashing
green Message button after you have completed the range test. Begin
Signal Range Test."
6. Press your Help Button. The Home Communicator will beep and the
light on your Help Button will flash green to indicate that the Home
Communicator has received the signal.
7. Move to other parts of your home and press your Help Button again.
Listen for the beep and check to see if the green light is flashing.
8. Once you have tested different locations in your home and
immediately outside your home, return to the Home Communicator
and press the flashing green Message button.
10
For Internal Use