Miele CM5300 Operating Instructions Manual page 65

Problem
Coffee dispensing is
repeatedly interrupted
and the message
bean container appears in
the display.
The descaling process
was started by mistake.
Cause and remedy
This is not a fault.
The brew unit has not detected the ground coffee.
Fill the The coffee may be too finely ground or there may not
be enough of it. Usually this is because the grinder is
set too fine and the amount set is insufficient.
 Confirm the message with OK.
If the coffee is too strong for you or tastes bitter, try a
different type of coffee beans.
If the display appears with all types of coffee:
 Set the grinder to a coarser setting (see "Grinder
setting").
 Check the amounts of coffee set for all coffee
drinks (see "Amount of coffee"). Select a larger
amount of coffee if necessary.
Don't forget to check any drinks changed in
"Profiles".
If the message only appears when dispensing certain
drinks:
 Check the amount of coffee set for this drink (see
"Amount of coffee"). Select a larger amount of
coffee.
 You may also need to set a coarser grinder setting.
The descaling process cannot be stopped once the
"OK" sensor has been touched.
Descaling must be continued through to completion.
This is a safety precaution to make sure the machine
is descaled correctly. This is important for the
longevity and functional efficiency of your coffee
machine.
 Descale the coffee machine (see "Descaling").
Problem solving guide
65