Problem Solving Guide; Messages In The Display - Miele CM5300 Operating Instructions Manual

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.

Messages in the display

Error messages must be confirmed with OK, otherwise the message can
reappear in the display even though the problem has been remedied.
Follow the instructions which appear in the display to remedy the problem.
If after this, the fault message appears in the display again, contact Miele Service.
Problem
F1, F2,
F80, F82
F41, F42, F74, F77, F235,
F236
F10, F17
Cause and remedy
There is an internal fault.
 Switch the coffee machine off with the On/Off
sensor . Wait for approx. one hour before
switching it back on again.
There is an internal fault.
 Switch the machine off with the On/Off sensor .
Wait for approx. two minutes before switching it
back on again.
No water or very little water is being drawn in.
 Remove the water container, fill it with fresh tap
water and replace it.
 Carefully clean the surface the water container sits
on, and the casing walls adjacent to the water
container. Dry these surfaces thoroughly.

Problem solving guide

59