Vhf External Speaker Port; Beep Volume Control; Talk Around; Microphone Speaker - AnyTone 5888UV III User Manual

7
General Setting

VhF exteRnAl SpeAkeR poRt

When the function setup as external (EXT), in order to hear the calling on
VHF, user can use sub speaker or connect an external dual track speaker
(SP-02). The calling from VHF and UHF are separated in 2 tracks.
11
Press key to enter function menu.
21 Turn the Main band selector knob to
choose No. 52 menu. The LCD displays
"VSPCONT".
31 Press the Main band selector knob to enter function setup.
41
Switch the Main band selector knob to choose wanted value.
INT: Use main internal speaker, the sub
internal speaker will be shut off. VHF and
UHF band share main speaker
EXT: Use sub internal speaker or external speaker, the VHF calling can
be heard from the sub speaker or external speaker.
51
Press the Main band selector knob or
25
back to function menu. Press
second to store setup and exit.

beep VoluMe contRol

11 Press
key to enter function menu.
21 Turn the Main band selector knob to
choose No. 53 menu. The LCD displays
"BP-VOL".
31 Press the Main band selector knob to enter function setup
41 Switch the Main band selector knob to choose wanted value.
LOW: BEEP volume is low.
HIGH: BEEP volume is high.
51 Press the Main band selector knob or
back to function menu.
key to store value and
key or hold selector knob for over 0.5
key to store value and

tAlk ARound

With this function on, the transceiver will not able to communicate with
another transceiver through a repeater.
11 Press key to enter function menu.
21 Turn the Main band selector knob No.54
menu. The LCD displays "TALK".
31 Press the Main band selector knob to enter function setup.
41 Switch the Main band selector knob to choose wanted value
ON: Turn on Talk Around
OFF: Turn off Talk Around
51
Press the Main band selector knob or
back to function menu. Press
second to store setup and exit.

MicRophone SpeAkeR

11 Press key to enter function menu.
21 Turn the Main band selector knob to choose
No.55 menu. The LCD displays "HND SPK".
31 Press the Main band selector knob to enter function setup.
41 Switch the Main band selector knob to choose wanted value
HSPKOFF: Turn off microphone speaker.
HSPK ON: Turn on microphone speaker.
MSPKOFF: Turn off Main speaker.
51 Press the Main band selector knob or
to function menu.Press key or hold selector knob for over 0.5 second
to store setup and exit.
When turn on microphone speaker, please set up Menu 52 VSPCONT to
be INT, otherwise the VHF signal can not be monitored.
NOTE
key to store value and
key or hold selector knob for over 0.5
key to store value and back