Tone Burst (Pilot Frequency); Keypad Mode Setup - AnyTone 5888UV III User Manual

31 Press the Main band selector knob to enter function setup.
41 Switch the Main band selector knob to choose wanted group
1-9 (9 fix groups) U1, U2 (2 self defined
scrambler groups), OFF.
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.
To enable communication with scrambler, 2 transceivers shall set with
same group.
NOTE

tone buRSt (pilot FRequency)

This function uses to start repeater. It needs certain intensity Pilot
Frequency to start a dormant repeater. As usual, no need to send pilot
frequency again once repeater started.
11
Press key to enter function menu.
21 Turn the Main band selector knob to
choose No.19 menu. The LCD displays
"TBST".
31 Press the Main band selector knob to enter function setup.
41 Switch the Main band selector knob to choose wanted frequency.
1000: Pilot Frequency is 1000Hz.
1450: Pilot Frequency is 1450Hz.
1750: Pilot Frequency is 1750Hz.
2100: Pilot Frequency is 2100Hz.
key to store value and
key or hold selector knob for over
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.

keypAd Mode Setup

11
Press key to enter function menu.
21 Turn the Main band selector knob to
choose No.20 menu. The LCD displays
"KEYMOD".
31
Press the Main band selector knob to enter function setup.
41 Switch the Main band selector knob to choose wanted mode.
KEY1: key1 mode, Normal mode, the left 4 keys have same functions
as the right 4 keys.
KYE2: the left 4 keypads will shared by
both band. And the right 4 key
pads will be re-defined.
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.
Notice: Definition of Keypad in KEY2 mode:
11
Left long press: In standby, long press this key to add/
delete optional signaling, repeat the long press it will set
optional signaling DTMF, 5TONE or 2TONE. When the LCD
displays DT means DTMF, displays 5T means 5TONE,
displays 2T means 2TONE.
21
Right Short press: In VFO mode, short press this key,
General Setting
key to store value and
key or hold selector knob for over
key to store value and
key or hold selector knob for over
7
18