Rotating The View; Displaying/Editing Information For The Geometric Data - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
6.11 Working with DXF files
6.11.2.5

Rotating the view

You can change the orientation of the drawing.
Requirement
The DXF file is open in the Program Manager or in the editor.
Procedure
...
6.11.2.6

Displaying/editing information for the geometric data

Precondition
The DXF file is opened in the Program Manager or in the editor.
Procedure
156
Press a cursor key to move the frame up, down, left or right.
3. Press the "OK" softkey to accept the section.
1. Press the "Details" and "Rotate figure" softkeys.
2. Press the "Arrow right", "Arrow left", "Arrow up", "Arrow down", "Arrow
clockwise" or "Arrow counter-clockwise" softkey to change the position of
the drawing.
1. Press the "Details" and "Geometry info" softkeys.
The cursor takes the form of a question mark.
2. Position the cursor on the element for which you want to display its geo‐
metric data and press the "Element info" softkey.
Operating Manual, 05/2017, A5E40868721
Turning