Working in manual mode
5.2 Selecting a tool and spindle
5.2.3
Starting and stopping the spindle manually
Procedure
Note
Changing the spindle speed
If you enter the speed in the "Spindle" field while the spindle is rotating, the new speed is
applied.
5.2.4
Positioning the spindle
Procedure
110
1.
Select the "T,S,M" softkey in the "JOG" mode.
2.
Select the desired spindle (e.g. S1) and enter the desired spindle speed
or cutting speed in the right-hand entry field.
3.
If the machine has a gearbox for the spindle, set the gearing step.
4
Select a spindle direction of rotation (clockwise or counterclockwise) in
the "Spindle M function" field.
5.
Press the <CYCLE START> key.
The spindle rotates.
6.
Select the "Stop" setting in the "Spindle M function" field.
Press the <CYCLE START> key.
The spindle stops.
1.
Select the "T,S,M" softkey in the "JOG" mode.
2.
Select the "Stop Pos." setting in the "Spindle M function" field.
The "Stop Pos." entry field appears.
Operating Manual, 05/2017, A5E40868721
Turning