Motorola MBP69SN User Manual page 42

The thermometer is intended for use in the electromagnetic environment
specified below. The customer or user of these thermometers should ensure
that it is used in such an environment.
Immunity Test
Electrostatic
discharge
(ESD) IEC
61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Surge IEC
61000-4-5
Voltage
dips, short
interruptions
and voltage
variations of
power supply
IEC 61000-4-11
Power
frequency
(50/60 Hz),
magnetic field
IEC 61000-4-8
42
Guidance and Manufacturer's Declaration
– Electromagnetic Immunity
IEC 60601 Test
Level
±6 kV contact
±8 kV air
Not applicable
Not applicable
Not applicable
3 A/m
Important Information Regarding Electromagnetic Compatibility(emc)
Compliance Electromagnetic
Level Environment – Guidance
±6 kV contact Floors should be made
±8 kV air of wood, concrete or
ceramic tile. If floors are
covered with synthetic
materials, the relative
humidity should be at
least 30 %.
Not applicable Not applicable
Not applicable Not applicable
Not applicable Not applicable
3 A/m Power frequency
magnetic fields should
be at levels characteristic
of a typical location in
a typical commercial or
hospital environment.