Page 1
USER’S GUIDE Smart Ear Thermometer Model: MBP69SN Please read this instruction manual before use...
Page 2
Please keep your original dated sales receipt for your records. To obtain warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty...
Page 3
For product-related questions, please call: US and Canada, 1-888-331-3383 E-mail: support@motorolastore.com On the Web: www.motorolastore.com/support This User’s Guide has all the information you need to make the most out of your product. Please read the Safety Instructions on page 7 before you install the unit. Inside the Box •...
Page 4
Overview of the Thermometer Protective cap 2. Infra-red sensor 3. Temperature measuring button 4. LCD 5. LED (green or red) 6. Mode button (select either body temperature or liquid temperature readings) MENU button (4 profiles and review readings) 8. Battery compartment cover Operation of the Thermometer Buttons Temperature Measuring Button Press once to take temperature...
LCD Display 4 user profiles 2. Memory symbol 3. Bluetooth symbol 4. Low battery symbol 5. Ear temperature symbol 6. Object/liquid temperature symbol Temperature display (°C/ °F) 8. Cleaning symbol...
Table of contents IMPORTANT SAFETY INFORMATION ..............7 BODY TEMPERATURE ....................10 PRIOR TO USE ......................... 11 SYSTEM REQUIREMENT ..................... 12 PAIRING THE THERMOMETER TO YOUR MOBILE DEVICE ......13 OVERVIEW OF HUBBLE APP ..................20 TEMPERATURE LED INDICATION ................21 TEMPERATURE TAKING HINTS................22 HOW TO MEASURE EAR TEMPERATURE ............23 10.
1. IMPORTANT SAFETY INFORMATION To obtain an accurate measurement, please read this manual carefully prior to use. • Use of this thermometer is not intended as a substitute for consultation with your physician. • Measurement results are for reference only. Contact your physician if you experience or suspect any health concerns.
Page 8
• Do not maintain or service the device while it is in use. • Should you experience any problems with this device (e.g. set-up, maintenance or use), please contact Motorola customer service or your local retailer. • Should any unexpected operations or events occur, please report them to the manufacturer.
Page 9
Caution: This device should not be used adjacent to or stacked with other equipment. Should adjacent or stacked use be necessary, this device should be observed to ensure normal operation in the configuration in which it will be used. Important Safety Information...
2. BODY TEMPERATURE Normal body temperature is a range. A person’s normal temperature range tends to decrease with age. The following table shows normal temperature ranges by age: Normal temperature ranges by age: 0 - 2 years 36.4 - 38.0 °C 97.5 - 100.4 °F 3 - 10 years 36.1 - 37.8 °C...
3. PRIOR TO USE The key to obtaining accurate readings is a clean sensor. To clean the sensor, use a cotton swab slightly moistened with alcohol to gently wipe its surface, and then immediately wipe dry using a clean cotton swab.
4. SYSTEM REQUIREMENT Smartphones/Tablets: Android™ and iOS ® only. System Requirements: iOS 8.0, Android™ 4.2 or above For more information, please visit: https://hubbleconnected.com/requirements System Requirement...
5. PAIRING THE THERMOMETER TO YOUR MOBILE DEVICE Download the “Hubble Connect for Smart Nursery” app • Go to the Google Play™ Store to search for Hubble Connect for Smart Nursery. • Download the Hubble Connect for Smart Nursery app and install it on your Android™...
Page 14
Launch the set-up wizard and follow the steps to create a user profile and add the thermometer. Make sure that the Smart Nursery app is active and that Bluetooth on your mobile device is activated when pairing is in progress. •...
Page 15
• Tap on the Smart Ear Thermometer to enter thermometer set-up mode. (Picture A3) • Tap Skip to set-up or scroll to review features. (Picture A4) Pairing The Thermometer To Your Mobile Device...
Page 16
• Follow “Step 1”. Make sure that your thermometer is switched on then press Next. (Picture A5) • Follow “Step 2”. Pair the thermometer with your mobile device via Bluetooth. (Picture A6) Pairing The Thermometer To Your Mobile Device...
Page 17
• Searching for your device (Picture A7) • Found your device. Please press on “MBP69-XXX”. (Picture A8) Pairing The Thermometer To Your Mobile Device...
Page 18
• Pairing the thermometer with your smart device. (Picture A9) • You have now successfully paired the thermometer with your smart device. Tap “Continue” (Picture A10) Pairing The Thermometer To Your Mobile Device...
Page 19
• User guide screen. (Picture A11) • You can now start using the thermometer. (Picture A12) Note: Your personal health data can only be transmitted when the app is on. The thermometer switches off automatically after 60 seconds of non-use. Pairing The Thermometer To Your Mobile Device...
6. OVERVIEW OF HUBBLE APP Overview of the Hubble App Total of 4 profiles To create and add the profile Online Indicates that the thermometer is connected to the smartphone. Offline Indicates that the thermometer is not connected to the smartphone.
7. TEMPERATURE LED INDICATION Two colors are used to provide LED indications: • Green LED: 34.0°C (93.2°F) to 37.9°C (100.3°F) = Normal temperature • Red LED: 38.0°C (100.4°F) to 42.9°C (109.3°F) = High temperature Temperature Led Indication...
8. TEMPERATURE TAKING HINTS A temperature measurement taken from the right ear may differ from a measurement taken from the left ear. Therefore, please take the temperature in the same ear. External factors may influence ear temperature. Specific external factors include: •...
9. HOW TO MEASURE EAR TEMPERATURE Remove the protective cap prior to use. Make sure the probe is clean before measuring. Place the thermometer in your hand with your thumb or forefinger on the [ ] button. • Do not press the button yet. Insert the probe very gently and slowly into the ear canal.
Page 24
Press the [ ] button to start measuring until you hear two ‘DIDI’ beeps (approx. 1 second). The measurement is complete. 4. Remove the thermometer from the ear canal. The LCD displays the measured temperature. A new measurement only can be taken 6 seconds after the previous temperature measurement or until the green/red LED turns off.
10. HOW TO MEASURE OBJECT (LIQUID) TEMPERATURE Changing the measurement mode Place the thermometer in your hand with your finger on the [ ] button. Press the [ ] button, then the thermometer enters the object/liquid temperature measuring mode. Note: Do not use this mode to measure body temperature. Hold the thermometer and ensure the probe is approximately 0.5cm (1/4 inches) from the liquid or surface whose temperature you want to measure.
11. CHECK THE MEMORY There is a total of 4 users; each user can store up to 50 sets of memory data for recording ear temperature measurements. The current measurement is always stored in the last storage space. When all storage spaces have been occupied, the earliest measurement is always deleted from the memory.
12. CELSIUS/FAHRENHEIT OPTION In standby mode, you can switch between Celsius (°C) and Fahrenheit (°F) by pressing and holding [ ] and the [ ] button until you hear one or two “beep” sounds. Celsius/fahrenheit Option...
13. REPLACING THE BATTERY When the low battery indicator “ ” appears on the LCD screen, or if the thermometer fails to operate, you should insert a new battery as soon as possible. The thermometer comes with two batteries (2×AAA). Remove the battery cover, remove the batteries, then insert new AAA batteries into the battery compartment.
14. DISPOSAL OF THE DEVICE (ENVIRONMENT) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this obligation.
E-mail: support@motorolastore.com Consumer Products and Accessories Limited Warranty (“Warranty”) Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International Ltd (“BINATONE”). What Does this Warranty Cover? Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product (“Product”) or certified accessory (“Accessory”) sold...
Page 31
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING...
Page 32
(c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage.
Page 33
These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent employee or staff of BINATONE, that may have been made in connection with the said purchase.
16. DESCRIPTION OF THE WIRELESS FUNCTIONS AND TECHNOLOGY RF Frequency 2.4GHZ-2.48GHZ Channel Bandwidth 2 MHz (-20 dB) Operation Voltage DC3.7V Types of Spread Spectrum FHSS Modulation Type GFSK Number of Channel Chanel Spacing 2 MHz ChannelFrequency 0-39 Channel 2.402-2.480GHZ Dwell Time (if FHSS) 400 ms Hopping Rate (if FHSS) 1600 HZ...
Page 35
to other wireless devices or controllers. Once the app connects to the peripheral device, the app will transmit the appropriate command, and once the BW-TSX device confirms that this command is correct, it will open the control panel, enabling the user to control the BW-TSX device. Otherwise, the app can’t control the BW-TSX device.
17. CARE AND CLEANING To ensure accurate measurements, it is very important KEEP INFRARED to keep the infra-red sensor clean and free of scratches. SENSOR CLEAN Fingerprints and dirt will affect the accuracy of the thermometer. In order to get an accurate measurement, please clean the infra-red sensor.
34.0°C/93.2°F or higher than 42.9°C/109.3°F. Please check the operation method Hardware problem Contact Motorola customer service or your local store Operating temperature is Use the thermometer in out of the range the prescribed range of operating conditions...
Page 38
Corrective Measures Inaccurate measurement Please check if you Please keep the or where there is any have allowed the thermometer and patient doubt regarding the thermometer and patient in the measuring room measured reading to stabilize in the room at least 30 minutes prior for at least 30 minutes to use Are you using the...
19. NORMALIZED SYMBOLS Type BF applied part (the applied part is the probe tip) Caution Refer to the Instruction Manual. The first number (2): Protection against solid foreign objects of 12.5 mm Ф and greater. The second number: Protection against vertically falling water drops when enclosure is tilted up to 15°.
20. IMPORTANT INFORMATION REGARDING ELECTROMAGNETIC COMPATIBILITY(EMC) With the increased number of electronic devices such as PC’s and mobile (cellular) telephones, medical devices in use may be susceptible to electromagnetic interference from other devices. Electromagnetic interference may result in incorrect operation of the medical device and create a potentially unsafe situation.
Page 41
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions The thermometer is intended for use in the eIectromagnetic environment specified below. The customer or user of this thermometer should ensure that it is used in such an environment. Emissions Test Compliance Electromagnetic Environment - Guidance RF emissions CISPR Group 1...
Page 42
Guidance and Manufacturer’s Declaration – Electromagnetic Immunity The thermometer is intended for use in the electromagnetic environment specified below. The customer or user of these thermometers should ensure that it is used in such an environment. Immunity Test IEC 60601 Test Compliance Electromagnetic Level...
Page 43
Guidance and Manufacturer’s Declaration – Electromagnetic Immunity The thermometer is intended for use in the electromagnetic environment specified below. The customer or user of this thermometer should ensure that it is used in such an environment. Immunity Test IEC 60601 Compliance Electromagnetic Environment Test Level...
Page 44
should be less than the compliance level in each frequency range. Interference may occur in the vicinity of equipment marked with the following symbol: Note 1: At 80 MHz and 800 MHz, the higher frequency range applies. Note 2: These guidelines may not be applicable in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Page 45
Recommended Separation Distance Between Portable and Mobile RF Communications Equipment and the Thermometer The thermometer is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customers or users of this thermometer can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the thermometer as recommended below, according to the maximum output power of the communications equipment.
21. FCC and IC regulations (FCC Part 15) Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 47
Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Fcc And Ic Regulations (fcc Part 15)
22. SPECIFICATIONS Power supply: DC 3V (2 x AAA battery) Ear measurement range: 34.0°C to 42.9°C (93.2°F to 109.3°F) Ear measurement accuracy: ±0.2°C(±0.4°F) Object measurement range: -22°C to 80.0°C (-7.6°F to 176.0°F) Object measurement accuracy: ±2.0°C (±4.0°F) Measurement time: 1 second Measurement interval: 1 second Dimensions:...
Page 52
International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries.
Need help?
Do you have a question about the MBP69SN and is the answer not in the manual?
Questions and answers