Use Your Headset; Reconnect The Headset To Your Bluetooth Device; Power On/Off; Manage Your Calls And Music - Philips SHB4385 User Manual

4 Use your
headset
Reconnect the headset
to your Bluetooth device
1
Turn on the Bluetooth function of
your Bluetooth device.
2
Make sure the headset is powered
off.
3
On both earpieces of the headset,
press and hold the multi-function
buttons for approximately 3
seconds.
» The LEDs on both earpieces
flash in white for 3 times; and
then it flashes in blue.
» Both earpieces are now
powered on and are paired with
each other.
» The headset will search the last
connected Bluetooth device and
reconnect to it automatically.
If the last connected one is
not available, the headset will
search and reconnect to the
second last connected device.
Tip
•
The headset cannot connect to more than
1 device at the same time. If you have two
paired Bluetooth devices, only turn on the
Bluetooth function of the device that you want
to connect.
•
If you turn on the Bluetooth function of your
Bluetooth device after turning on the headset,
you have to go to the Bluetooth menu of the
device and connect the headset to the device
manually.
Note
•
If the headset fails to connect to any
Bluetooth device within 15 minutes, it will turn
off automatically to save the battery life.
•
In some Bluetooth devices, connection may
not be automatic. In this case, you have to
go to the Bluetooth menu of your device and
connect the headset to the Bluetooth device
manually.

Power on/off

Task Multi-
function
button
Turn the Right and
headset on. left ear-
pieces
Turn the Right or left
headset off. earpiece
Manage your calls and
music
Music control
Task Multi-
function
button
Play or pause Right
music. earpiece
Skip forward. Right
earpiece
Skip Right
backward. earpiece
Operation
Press and
hold for 3
seconds.
Press and
hold for 4
seconds.
» The
white
LED
flashes
once.
Operation
Press once.
Press twice.
Press 3
times.
EN
7