Pair The Headset With Your Bluetooth Device At The First Time; Pair The Headset With Another Bluetooth Device - Philips SHB4385 User Manual

Pair the headset with
your Bluetooth device at
the first time
1
Make sure that the headset is fully
charged and powered off.
2
On both earpieces, press and hold
the multi-function buttons for
approximately 3 seconds.
» The LED on both earpieces
flashes in white for 3 times; and
then it flashes in blue.
» Both earpieces are now
powered on and are paired with
each other.
» The headset is now in pairing
mode and is ready to pair with a
Bluetooth device (e.g. a mobile
phone).
3
Turn on the Bluetooth function of
your Bluetooth device.
6
EN
4
Pair the headset with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
Note
•
After powering on, if the headset cannot find
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
The following example shows you how
to pair the headset with your Bluetooth
device.
1
Turn on the Bluetooth function
of your Bluetooth device, select
Philips SHB4385.
2
Enter the headset password
"0000" (4 zeros) if prompted. For
those Bluetooth devices featuring
Bluetooth 3.0 or higher, no need to
enter a password.
Philips SHB4385
SHB4405
Pair the headset with
another Bluetooth device
If you have another Bluetooth device
that you want to pair with the headset,
make sure the Bluetooth function in any
other previously paired or connected
devices are turned off. Then follow the
steps in 'Pair the headset with your
Bluetooth device at the first time'.
Note
•
The headset stores up to 2 devices in the
memory. If you try to pair more than 2 devices,
the earliest paired device is replaced by the
new one.