Contents 1 Important safety instructions Hearing Safety General information Compliance with EMF 2 Your wireless on-ear headset What's in the box Other devices Overview of your wireless on-ear headset 3 3 Get started Charge your headset Pair the headset with your mobile phone 4 4 Use your headset Connect the headset to a Bluetooth device...
1 Important safety General information instructions To avoid damage or malfunction: Caution • Do not expose the headset to excessive heat. • Hearing Safety Do not drop your headset. • Headset shall not be exposed to dripping or splashing. • Do not allow your headset to be submerged in water.
Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the Congratulations on your purchase, and headset. welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Overview of your wireless With this Philips wireless on-ear headset, you on-ear headset can: •...
• Activate the Bluetooth feature of your Use only the original USB charging cable to avoid any damage. mobile phone, select Philips SHB5500. • Finish your call before charging the headset, as Enter the headset password "0000" (4 connecting the headset for charging will power the headset off.
4 Use your Turn the Press and hold • 1 long headset off. for more beep headset than 4 seconds • 1 long white flash Play or pause 1 short Press Connect the headset to a music. beep Bluetooth device Pick up or 1 short Press...
5 Technical data • Up to 9 hours of music time or talk time • Up to 200 hours of standby time • Normal time for a full charge: 3 hours • Rechargeable Lithium-ion battery (200 mAh) • Bluetooth 3.0, Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP;...
Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions Remove the integrated battery of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. Note com. • This product has been designed, tested and Make sure the headset is disconnected from the USB charging cable before removing the battery.
AVRCP (see 'Technical data' on page 7). mobile phone' on page 4). • Make sure that the LED light flashes blue For further support, visit www.philips.com/ and white alternately before you release support. . Do not stop holding the button if you see the blue LED only.
Need help?
Do you have a question about the SHB5500 and is the answer not in the manual?
Questions and answers