To Install The Network/ Power Unit - Nokia RoofTop R240 User Manual

7.3 To install the Network/ Power Unit

Nokia RoofTop™ Wireless Router Installation Guide
This chapter is incomplete. Awaiting further technical
NOTE:
information and illustrations from Nokia SMEs
1.
Trim back the multiwire cable insulation taking care not to cut any of
the smaller wires in the cable.
2.
Remove the Network/Power Unit from its' packaging and loosen the
strain relief (the unit is already disassembled).
3.
Place the cable through the strain relief and slot the appropriate wire
into the appropriate slot in the connection. Using the punch down
tool, fix the wire into the Network/ Power Unit.
NOTE: Place illustration of connectors here!!
4.
When all wires are connected securely, reconnect the cable strain
relief in the unit to prevent the multiwire cable from being pulled out
of the unit.
To install the Network/ Power Unit
47