General Aerial Application Pattern - Yamaha RMAX Type II G Unit Operation Manual

General Aerial Application Pattern

When operating an unmanned helicopter for the purpose of spraying agricultural chemicals, ensure safe oper-
ation, as well as the safety of humans, animals, agricultural products, and the environment during aerial appli-
cation.
Example: Disease and pest control of a rice paddy
• Flight altitude: 3 to 4 m
• Flying speed: 10 to 20 km/h
• Flying interval: 5 or 7.5 m
• Wind velocity: 3 m/s maximum
Just passed 10 meters,
and 5 meters
When performing tasks such as refueling,
never approach (or allow others to approach)
within 20 m of the helicopter until the main
rotor has come to a complete stop and the
engine has stopped. Entering within 20 m of
the helicopter could cause a serious acci-
dent.
TIP
If the GPS signal reception is good, the outer
YACS warning lights will illuminate if the fly-
ing velocity exceeds 20 km, regardless of the
state of the GPS control switch on the flight
transmitter (Velocity display function).
Control the flight velocity so that the outer
YACS warning lights do not illuminate.
Flying height between
3 and 4 meters
Wind
DANGER
Flying speed between
10 and 20 km/h
Flying interval 5 or 7.5 meters
Flying Procedure
Affirmative!
5-10