To Select A Value In An Edit View - ABB ACH580 Quick Start Up Manual

To select a value in an edit view:

•
Use and to select the value.
Press (Save) to accept the new setting, or press
(Cancel) to go back to the previous view without making
changes.
Set the date and time as well as date and time display
formats.
• Go to the edit view of a selected row by pressing
•
Scroll the view with
Go to the next view by pressing
Refer to the motor nameplate for the following nominal value settings of the motor. Enter the values exactly
as shown on the motor nameplate.
Example of a nameplate of an induction (asynchronous) motor:
and .
(Next).
EN – Quick start-up guide 5
.
EN