Tera Term; Using Tera Term; Connecting With Tera Term - HP Designjet 3D Service Manual

Tera Term

Using Tera Term

When using these commands, there is a high risk of damage to the machine
because the printer does not recognize the location of any other components
in the machine that may be in the way. This means if you use the command
to move the Z-Stage, you will have to make sure that the Head is moved out
of the way. The same if you want to move the X-Y axis. The Z-Stage has to be
moved out of the way. The printer does see the EOT switches and the Home
Sensors.
Required Tools
• Tera Term software installed on workstation or lap top computer.
NOTE: Version 4.71 is used for these instructions, other version
may function differently.
• Null modem cable ("Laplink") with DB9 style connectors, pins 2 and
3 swapped .
NOTE: If your computer does not have a serial port, connect
through a quality USB to serial converter. We recommend the
IOGEAR GUC232A.
• Computer with Windows XP , Windows Vista or Windows 7.

Connecting with Tera Term

1. Verify printer is powered ON.
2. Connect the Null modem cable or USB to serial converter cable from the
computer to the printer serial port connector.
3. Open Tera Term:
4. Once Tera Term is started the New Connection Window will come up,
see Figure 435 If the New Connection window does not open, click File
> New Connection.
-431