HP Designjet 3D Service Manual page 391

Figure 382: Measuring distances from outside edges of D and G
20. Measure and record the diameter of circle D along the center line
between A and G. See
Figure 383: Measuring diameter of circle D
21. Add the lengths derived from steps 18 and 19 (A-D and D-G) and then
subtract the width of circle D derived from step 20. Record this total as
"Left"
22. Measure and record the distance from the outside edge of circle G to
the outside edge of circle H. See
Figure 384: Measuring distances from outside edges of G and H
Figure 383
Figure 384
-375