Resetting Your Digifobpro - Stoneridge digifobpro User Manual

Troubleshooting
digifobpro - complete reset:
If your digifobpro stops responding completely it is possible to reset the
device by holding down the Return button for 5 seconds. Do not use this
option as a regular feature especially if a firmware upgrade is in process as it
is equivalent to removing the power from the battery momentarily.
Firmware upgrade failure:
If for some reason a firmware upgrade is unsuccessful it is possible to return
to the previous firmware stored on the device. First turn the digifobpro OFF.
With the unit now off, hold down the UP arrow and keep it held down, now
press the OK button at the same time. Press OK when prompted to do so.
digifobpro will now restore the former firmware. This option should only be
used as a last resort.
digifobpro User Instructions Page - 22