Stoneridge SE5000 Exakt Duo2 Quick Manual

Default Activity key on/off
This setting gives the opportunity to preset an automatic activity change for
both driver and co-driver when switching the ignition key on or off (consult
relevant authority for national regulations).
1. Press the confirm button.
Select and confirm Settings.
2. Select and confirm Parameters.
3. Select and confirm Default activ.key on or
Default activ.key off.
4. Select and confirm the preferred activity; No
change, Rest, Available or Work.
5. The following is displayed.
6. Press the cancel button three times to re-
turn to the standard display.
Daylight Saving Time
An automatic local time adjustment for summer and winter is automatically
prompted on the last Sunday in March and last Sunday in October, respectively.
1. Select YES to acknowledge or NO to cancel
the time change.
SE5000 Rev.7.5, 102024P/01R04 EN
SETTINGS
Parameters
Default activ.
key on
Default activ.
key off
Changes
saved
New time?
YES
03:01
Company Quickguide
SE5000 Digital Tachograph
Driver Driver Co-driver Co-driver
card tray button button card tray
Note! Card handling and browse in menu is only possible when vehicle is not moving.
Insert the card
(always possible in standard menu and ignition ON)
1. Press and hold the driver or co-driver button until tray opens.
2. Insert the card with the chip facing upward.
3. Close the tray by pushing it gently forward.
1
2 2
Withdraw the card
(not possible in all menus)
1. Press and hold the driver or co-driver button until tray opens.
2. Press the card up slightly from underneath through the opening in the tray
or push the edge of the tray down until the card pops out.
1 2
For full details on the SE5000 functionality we refer to the
Driver & Company Manual or visit www.stoneridgeelectronics.com
E Cancel, move back to previous display
TR Select, highlight, change values
y Confirm, move forward in displays
Paper
cassette
3 3
Stoneridge - every angle covered