Table of Contents
Advertisement
Inserting the batteries in the remote control
The remote control is powered by two 1.5V AAA batteries.
To install or replace batteries:
1. Press and then slide the cover to open it.
2. Align the batteries according to the (+) and (–) indications inside the
battery compartment.
3. Replace the cover.
CAUTION: The incorrect use of batteries can result in leaks or bursting. Be sure to
follow these instructions:
•
Place "AAA" batteries matching the (+) and (–) signs on each battery to the (+) and (–)
signs of the battery compartment.
•
Do not mix battery types.
•
Do not combine new batteries with used ones. It causes shorter life or leakage of batteries.
•
Remove the dead batteries immediately to prevent them from liquid leaking in the battery
compartment. Don't touch exposed battery acid, as it can damage your skin.
NOTE: If you do not intend to use the remote control for a long period, remove the
batteries.
Handling the remote control
•
Do not subject to strong shock.
•
Do not allow water or other liquids to splash on the remote control. If the remote control
gets wet, wipe it dry immediately.
•
Avoid exposure to heat and steam.
•
Other than to install the batteries, do not open the remote control.
Setting Up the Display
|
33
Hide quick links:
Advertisement
Table of Contents
