Siemens SINUMERIK 840D sl Function Manual page 491
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
05.08
Fault fine codes that do not come from the crosswise data comparison
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
10.2 NCK safety alarms for SINUMERIK 840D sl
226
For the "Safe cam track" monitoring function there is a different status
between the NCK and drive for cams SN7 to SN12. The actual status
image of the NCK (result list 4) is output as supplementary info %3
(comparison value NCK) and the actual status image from the drive is
output as %4.
Supplementary infos %3 and %4 are also saved in drive parameters
r9736[0] (NCK) and r9736[1] (drive).
Remedy
Result list 4. Check the tolerance of the cams, evaluate the fault code
in drive parameter r9736[0,1].
227
For the "Safe cam track" monitoring function there is a different status
between the NCK and drive for cams SN13 to SN18. The actual status
image of the NCK (result list 5) is output as supplementary info %3
(comparison value NCK) and the actual status image from the drive is
output as %4.
Supplementary infos %3 and %4 are also saved in drive parameters
r9737[0] (NCK) and r9737[1] (drive).
Remedy
Result list 5. Check the tolerance of the cams, evaluate the fault code
in drive parameter r9737[0,1].
228
For the "Safe cam track" monitoring function there is a different status
between the NCK and drive for cams SN19 to SN24. The actual status
image of the NCK (result list 6) is output as supplementary info %3
(comparison value NCK) and the actual status image from the drive is
output as %4.
Supplementary infos %3 and %4 are also saved in drive parameters
r9738[0] (NCK) and r9738[1] (drive).
Remedy
Result list 6. Check the tolerance of the cams, evaluate the fault code
in drive parameter r9738[0,1].
229
For the "Safe cam track" monitoring function there is a different status
between the NCK and drive for cams SN25 to SN30. The actual status
image of the NCK (result list 7) is output as supplementary info %3
(comparison value NCK) and the actual status image from the drive is
output as %4.
Supplementary infos %3 and %4 are also saved in drive parameters
r9739[0] (NCK) and r9739[1] (drive).
Remedy
Result list 7. Check the tolerance of the cams, evaluate the fault code
in drive parameter r9739[0,1].
1000
The check timer has expired while the change timer has still not ex-
Diagnostics
10-491
Advertisement
Table of Contents
