HP ProCurve 6400cl Series Management And Configuration Manual page 416

Monitoring and Analyzing Switch Operation
Interface Monitoring Features
Figure B-19. How To Select a Monitoring Port
B-24
5. Use the Space bar to select the port to use for monitoring.
6. Highlight the Monitor field and use the Space bar to select the interfaces
to monitor:
Ports: Use for monitoring ports, static trunks, or the mesh.
VLAN: Use for monitoring a VLAN (5300xl switches only).
7. Do one of the following:
• If you are monitoring ports, static trunks, or the mesh, go to step 8.
• If you are monitoring a VLAN on a 5300xl switch:
i. Press
[Tab]
Move the cursor to the Monitoring Port parameter.
Inbound Port and Trunk Monitoring (Only) on the Switch 4108
or the down arrow key to move to the VLAN field.
Use the Space bar to
select a VLAN to monitor.