HP ProCurve 6400cl Series Management And Configuration Manual page 315

params value matches params name.
Figure 14-8. Example of SNMP Notification and Trap Configuration
timeout < value >
Specifies how long the switch waits for a response from
the target before it retransmits the packet. (Default:
1500)
max-msg-size<size> Default:1472
Specifies the maximum number of bytes a message to
this target can contain.
[no] snmpv3 params <params_name> user <user_name>
Adds or deletes a user parameter for use with target
address. The params_name must match the parms_name
in the targetaddress command. The user_name should be
a user from the User Table. For more information on
users see "SNMPv3 Users" on page 14-8.
A complete params command must also have a sec-model
and msg-processing entry.
< sec-model < ver1 | ver2c | ver3 >
This established the security model to use for messages
passed to the targetaddress. If you use ver3 then
msg-processing must also be ver3.
< msg-processing < ver1 | ver2c | ver3 > [noaut | auth | priv]
Establishes the msg-processing algorithm for messages
passed to the target address. If ver3 is used and sec
model is ver3 then you must select a security services
level (noauth, auth, or priv).
ver3 means you must select
a security service level.
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Tag value matches taglist value.
14-19