Connection To Dvb-Asi Output Equipment - Fujitsu IP-HE950 Hardware User's Manual

IP-HE950 Hardware User's Guide
2.5.2

Connection to DVB-ASI output equipment

Connect DVB-ASI output equipment to the ASI input connector of the IP-HE950D
(decoder).
Connect a BNC cable to ASI-IN of the IP-HE950D. A signal is terminated with 75 Ω.
The following figure shows how to connect them.
See
Figure 2-10 DVB-ASI output equipment connection
For details on connectors and cables, refer to "4.2 Cable and Connector
Details." For electrical specifications, refer to "A.2.3 Interface
specifications."
Chapter 2 Installation and Connection
Copyright 2017 FUJITSU LIMITED
30