Fujitsu IP-HE950 Hardware User's Manual page 34

IP-HE950 Hardware User's Guide
2) Rack mounting
When this unit is mounted and operates in a rack, the ambient
temperature of the unit inside the rack may be hotter than the ambient
temperature of the room.
Take care that the ambient temperature inside the rack does not exceed
the guaranteed operating temperature of this unit. The guaranteed
operating temperature of the unit is 55°C.
When mounting this unit to operate in a rack, allocate the intake/exhaust
space described in "2.1.4 Installation space."
When mounting this unit in a rack, use the dedicated mount kit to secure
it firmly to the rack.
In addition, if mounting the unit in the rack could make the whole rack
unstable, do not mount it.
The IP-HE950 weighs 2.5 kg.
When mounting two IP-HE950 per 1U with dedicated mount kit, do not
leave one unit after removing another unit. This may cause deformation of
mount kit.
Confirm that the power supply capacity of the power strips and service
outlets in the rack, which supply power to this unit, exceeds the total
power rating of all the equipment connected in the rack.
The power rating of this unit is as follows:
- IP-HE950E: 100 to 240 VAC, 50/60 Hz, single-phase, 0.93 to 0.53 A
- IP-HE950D: 100 to 240 VAC, 50/60 Hz, single-phase, 0.89 to 0.51 A
High leakage current may flow through the power strip grounding
conductor when the IP-HE950 power cord is connected to the power strip.
Be sure to connect to ground before connecting the power supply line.
If the power cord is not directly connected to a branch circuit, use a
power strip that has an industrial grade plug.
Chapter 2 Installation and Connection
Copyright 2017 FUJITSU LIMITED
20