Kinze 3000 Operator's Manual page 3

M0188-01
TO THE DEALER
Predelivery service includes assembly, lubrication, adjustment, and test. This service makes sure planter is delivered to
the retail customer/end user ready for field use.
PREDELIVERY CHECKLIST
Use the following checklist and inspect planter after it is completely assembled. Check off each item found satisfactory
or after proper adjustment is made.
 Row units properly spaced and optional attachments correctly assembled.
 All grease fittings in place and lubricated.
 All working parts are moving freely. Bolts are tight and cotter pins are spread.
 All drive chains properly tensioned and aligned.
 Check for oil leaks and proper hydraulic operation.
 Hydraulic hoses are routed correctly to prevent damage to hoses.
 Inflate tires to specified air pressure. Tighten wheel lug bolts to specified torque.
 All safety decals correctly located and legible as shown in Parts Manual. Replace if damaged.
 All reflective decals and SMV sign correctly located as shown in Parts Manual and visible when the planter is in
transport position.
 Safety/warning lights correctly installed and working properly.
 Paint all parts scratched in shipment or assembly.
 All safety lockup devices are on planter and correctly located.
 Seed meters performance checked on test stand.
 Auxiliary safety chain properly installed and hardware torqued to specification.
This planter has been thoroughly checked and to the best of my knowledge is ready for delivery to the retail
customer/end user.
(Signature Of Set-Up Person/Dealer Name/Date)
RETAIL CUSTOMER/END USER
Name
Street Address
City, State/Province
ZIP/Postal Code
Rev. 6/11
Predelivery/Delivery Checklist
Delivery Date
Model No.
Dealer Name
Dealer No.
3000 Serial No.
TM
Model 3000