Using Google Map - Samsung GALAXY TAB SC-01C Instruction Manual

Table of Contents

Advertisement

Item
Reset to default

Using Google Map

By using Google Map, you can search for the current location or other
locations, or obtain guide information to destination.
To use Google Map, enable data connection (3G/GPRS) or connect to Wi-
Fi.
Google Map does not cover the whole world or region.
Enabling location information
If you use an application that uses location information, you need to enable
GPS function in advance. You can set for detecting location information
more accurately using Wi-Fi/Mobile network.
1
From the Home screen, w ➝ "Settings" ➝ "Location and
security".
2
Mark a detection method.
You can enable all.
Item
Use wireless networks
Detect location information using Wi-Fi/
Mobile network.
Use GPS satellites
Detect location information more
accurately. However, FOMA terminal
consumes much power of battery.
Description
Perform deleting data and reset of
settings to return to the default in
Browser.
Description
Precautions on using GPS
Use the GPS system with great care. DOCOMO is not liable for any
damage caused by abnormality of the system.
Note that DOCOMO shall have no liabilities for any purely economic loss
including those due to missing a chance to check the measurement
(communication) results because of external factors (including the running
out of the battery), such as a failure, malfunction, or any other problems of
the FOMA terminal or the power failure.
You cannot use the FOMA terminal as a navigation device for an aircraft,
vehicle, and person. Note that DOCOMO shall have no liabilities
whatsoever even if you suffer damage or loss while performing a navigation
using the location information.
You cannot use the FOMA terminal as a high-accuracy measurement GPS.
Note that DOCOMO shall have no liabilities whatsoever even if you suffer
damage or loss due to a deviation of the location information.
GPS is operated by the U.S. Department of Defense. The department
controls the accuracy of the system, and manages the system. Therefore,
GPS radio wave condition may be controlled (degradation of accuracy,
suspension of radio wave transmission, etc.) at the discretion of the U.S.
Department of Defense.
Some wireless communications products (mobile phone, data detectors
and some others) block satellite signals and also cause instability of signal
reception.
Some map displays based on location information (latitude/longitude
information) may be not accurate due to some countries' or regions'
regulations.
Where radio waves are difficult to receive
Note that radio waves may not be received or it may be difficult to receive
radio waves in the following conditions, since GPS uses radio waves
from a satellite.
- Inside or immediately under a building
- Inside a basement or tunnel, and below the ground or water
Continued to next page
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents