Pausing Cd Playback; Entering Disc Titles - Pioneer ANH-P9R-BK Operation Manual

Section
Multi-CD Player
07

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
1 Press
FUNC
the pause mode.
2 Press
PAUSE
The light illuminates. Play of the current track
pauses.
• Press again to turn pause off.
PAUSE
• When the pause mode is exited while pause is
on, "PAUSE" is displayed in the basic display.
Note
• You can also turn pause on or off by pressing
in the following display.
PAUSE
64
En
and then press
PAUSE
to turn pause on.

Entering disc titles

Disc title input lets you input up to 100 CD titles
up to 10 letters long (with ITS memory) into the
multi-CD player. If you input a CD title, the
to select entered title is displayed.
1 Press 5 or ∞ to play a disc you want to
enter the title.
2 Press
to select the disc title input mode.
3 Press
Press
ABC
following modes:
Alphabet (upper case), numbers and symbols
— Alphabet (lower case) — European letters,
such as those with accents (e.g. á, à, ä, ç)
• Press
012
bols mode.
4 Press 5 or ∞ to select letters, numbers and
symbols.
• To insert a space, select the flashing cursor
"_".
5 Press 3 to move the cursor to the next
character position.
• Press 2 to move backwards in the display.
and and then press
FUNC NEXT
to switch the character mode.
ABC
repeatedly to switch between the
to switch to the numbers and sym-
TTLin