Basic Operation; Turning A Source On Or Off; Basic Operation Turning A Source On Or Off - Pioneer ANH-P9R-BK Operation Manual

Basic Operation

Turning a source on or off

You can select the source you want to listen to.
To switch to built-in CD player, load a CD in this
product. (Refer to Basic operation on page 55.)
1 Press to select the desired source
SOURCE
(e.g., tuner).
Press repeatedly to switch between
SOURCE
the following sources:
—
Built-in CD player TV tuner
—
DAB tuner Multi-CD player
—
External unit 2 AUX
2 Raise or lower the volume.
Rolling the VOLUME changes the volume level.
• Roll clockwise to raise the volume level.
• Roll counterclockwise to lower the volume
level.
3 Press and hold
SOURCE
off.
— —
Tuner
— —
External unit 1
to turn the source
Notes
• External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this product. Two external
units can be controlled by this product,
although "External" is displayed whether you
select external unit 1 or external unit 2. When
two external units are connected, the alloca-
tion of them to external unit 1 or external unit
2 is automatically set by this product.
• In the following cases, the sound source will
not change:
* When no product corresponding to the
source is connected to this product.
* No audio disc is set in this product.
* No magazine is set in the multi-CD player.
* AUX (auxiliary setting) is set to off. (Refer to
page 82.)
• When this product's blue/white lead is con-
nected to the car's auto-antenna relay control
terminal, the car's auto-antenna extends
when this product's source is switched on.
Section
02
15
En