Setting The Gain; Defining The Db Incrementation For Gain - GE Krautkramer USM 35X Operator's Manual

Setting the gain

5.2 Setting the gain
This function, operated via the left-hand rotary knob,
enables you to quickly and directly set the gain.
You can use the gain to adjust the required sensitivity
in order to control the echo amplitudes.
– Turn the left-hand rotary knob to set the gain. The
current gain is indicated in the top left corner of the
screen.
Krautkramer USM 35X

Defining the dB incrementation for gain

You can use the
tation for setting the gain. You have a choice between
6 steps:
• 0.0 dB (locked)
• 0.5 dB
• 1.0 dB
• 2.0 dB
• 6.0 dB
• 6.5 ... 20.0 dB
H Note:
The setting 0.0 dB locks the gain in this way preventing
any accidental change of setting.
You can determine the step size of the sixth step using
the function dBSTEP in the function group RECV.
– Press to change between the six steps.
The corresponding step size setting is indicated
below the current gain on the screen.
Issue 01, 04/2005
Operation
key to select a certain incremen-
5-5