JVC NX-F3B Service Manual page 18

3.2.3 Removing the feed motor assembly
(See Fig.10)
(1) Remove the one screw F attaching the feed motor assem-
bly.
(2) Remove the feed motor wires from solder part of spindle
motor board.
3.2.4 Removing the spindle motor assembly
(See Fig.11)
(1) Remove the three screws G attaching the spindle motor
from spindle motor board.
1-18 (No.MB662<Rev.003>)
Solder part
Middle gear
Lead screw
Fig.10
G
Fig.11
F
Spindle motor