Philips VARI-LITE VL6000 Beam Luminaire User Manual page 96

❋
VARI LITE - VL6000 B
6-32 3/8" PPZ SEMS Screw (x8)
Note:
Head covers not shown
Once cleaning is complete, replace parts and screws in order as follows:
Step 1. Install the spider assembly and secondary reflector. One of the spider legs aligns with the V
in the logo at the center of the secondary reflector. The leg must install in the slot centered
between the yokes. See
78
L U '
EAM UMINAIRE SER
Front Lens Assembly
6-32 3/8" PPB SEMS screw
Front Inlet Cover (x2)
Figure A-7: Remove Parts for Cleaning
Figure A-8
2 7 Ap ri l 2 017
M
S ANUAL
6-32 3/8" PFZ Screw (x3)
Spider Assembly with Secondary Reflector
for correct alignment.
Primary Reflector
6-32 3/8" PPB SEMS screw
02.9708.0002