Fixed Color Wheel Filter Removal And Installation; Rotating Gobo Removal And Installation - Philips VARI-LITE VL6000 Beam Luminaire User Manual

❋
VARI LITE - VL6000 B

Fixed Color Wheel Filter Removal and Installation

Fixed color wheel filters in the VL6000 are glued into the color wheel. Filters cannot be removed and
installed while bulkhead is in the fixture.

Rotating Gobo Removal and Installation

CAUTION: VL6000 Beam Luminaires accept glass gobos only. Use of metal gobos in these
luminaires may damage gobo assembly and will void the luminaire warranty.
WARNING: Remove power from luminaire and allow luminaire to cool completely before
performing this procedure.
To remove and replace rotating gobos:
Step 1. Remove power from luminaire.
Step 2. Remove head cover assembly as indicated in by loosening four captive screws and lifting
cover away from luminaire head.
Note: Note: head cover is attached by a safety tether.
Captive Phillips
Screws (x4)
Pan Lock
74
L U '
EAM UMINAIRE SER
Figure A-4: Replacing Rotating Gobos
2 7 Ap ri l 2 017
M
S ANUAL
* Each head cover is secured with a tether.
Head Cover Assembly
to access Color Wheel 1*
Color/Gobo Assembly
Luminaire Head
Assembly
02.9708.0002