Xm-P55 - JVC XM-P55 Service Manual

XM-P55

XM-PJ1
Self diagnosis Function of MD
Power Supply ------------- Use to a battery charger by more than 1.3volt
Establishment ------------ Set up the horizontal
1. The method of changing to the self-diagnosis mode turns off
the power supply of the main body first.
2. The power supply of the main body is turned on while pushing
"PLAYMODE +DISPLAY+A.B.BASS "of the remote control unit at the same time.
3. It changes into the self-diagnosis mode, and the self-diagnosis starts.
Test 's Command for the self-diagnosis mode
Command data1
Ope.mode State
[Indicators on the display
of the remote control]
Play Mode butto
n
A.C.BASS
A.C.BASS
(Active Clear Bass) button
2-24
data2 data3 data4
PLY P REC P EEP R EEP S
=00: Wait to Test command
=DD: Going to Resume's EEPROM initialize
=DE: Going to servo's EEPROM initialize
=E2: Turn on the leaser of PLAY
=D3: Turn up the laser
=D4: Turn down the laser
=D1: Turn off the laser
=D5: Rewind to the FEED
=D6: Adjust to the PRE DISC
=D7: Adjust to the MO DISC
=92: Break out the trouble
DISPLAY button
VOL
JOG
MODE
data5 data6 data7
Disc
mark
The following are displayed
and it stops at the NG generation.
The KEY input afterwards
is disregarded.
Repeat
FAV
BASS
MONO
Random
Battery