JVC XM-P55 Service Manual page 14

XM-P55
XM-PJ1
Removal of Main Parts
<XM-P55 Section>
Removing the MD Door Assembly and
the Bottom Cover (See Fig.1 to 4)
1. Move the door lever and open the door.
2. Remove the four A screws attaching the MD door
assembly and remove the MD door assembly from the
body.
3. Reverse the body and remove the six B screws attaching
the bottom cover.
4. Release the joint a outside and remove the bottom cover
from the body.
CAUTION: When reassembling the bottom cover, fit the
part b of the hold knob slot to the hold
switch on the main board (See Fig.4, 5).
Bottom cover
B
Fig.3
2-12
MD door assembly
B
Part b
B
A
Fig.1
Door lever
Fig.2
B
Part a
B
Fig.4
MD door
assembly
A
Bottom cover
B