Gear Shift Shaft Components; Gear Shift Shaft Disassembly And Assembly - Suzuki Liana RH413 Service Manual

5B-33 Manual Transmission/Transaxle:

Gear Shift Shaft Components

1. Low speed gear shift shaft
2. High speed gear shift shaft
3. 5th & reverse gear shift shaft

Gear Shift Shaft Disassembly and Assembly

High Speed and Low Speed Gear Shift Shaft
1) Using feeler gauge, check clearance between fork
(1) and sleeve (2) and replace those parts if it
exceeds limit of 1.0 mm (0.039 in.).
NOTE
For correct judgement of parts replacement,
carefully inspect contact portion of fork and
sleeve.
Clearance "a" between fork and sleeve
Service limit: 1.0 mm (0.039 in.)
4. 5th & reverse gear shift guide shaft
5. Reverse gear shift arm
6. Gear shift locating bolt
: Apply sealant 99000-31260 to bolt thread.
2) Insert each gear shift shaft into case and check that
S3RH0A5206022 it moves smoothly. If it doesn't, correct by using
oilstone, reamer or the like.
5th and Reverse Gear Shift Shafts
Disassembly
Disassemble component parts by using spring pin
remover and hammer.
Special tool
(A): 09922–85811 4.5 mm
I2RH01520068-01
S3RH0A5206021
I3RH0A520024-01
: Tightening torque