Communication Logic Operands - GE D90 Plus Instruction Manual
Line distance protection system
Hide thumbs
Also See for D90 Plus:
- Instruction manual (694 pages) ,
- Communications manual (222 pages) ,
- Instruction manual (688 pages)
Table of Contents
Advertisement
CHAPTER 6: COMMUNICATIONS
Communication logic operands
PLUS
D90
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 102: Shared operands configuration window
The left side of this screen displays all D90
function as shared operands. Select any operands from the other six primary features by
clicking on the >> button. Operands may be de-assigned as shared operands by pressing
the << button.
The following communication logic operands are available for the D90
alphabetically by operand syntax.
Remote double-point status input operands
RemDPS Ip 1 BAD.......................................Asserted when remote double-point status input 1 is in the bad
RemDPS Ip 1 INTERM ...............................Asserted when remote double-point status input 1 is in the
RemDPS Ip 1 OFF .......................................Asserted when remote double-point status input 1 is in the off
RemDPS Ip 1 ON.........................................Asserted when remote double-point status input 1 is in the on
RemDPS Ip 2.................................................The operands listed above are also available for remote
Plus
operands that are available to the protection
state.
intermediate state.
(open) state.
(closed) state.
double-point status inputs 2 through 16.
SHARED OPERANDS
Plus
. They are listed
133
Advertisement
Table of Contents
