Table of Contents
Advertisement
parts List and diagram
pLEASE REAd THE FOLLOWINg cAREFULLy
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
parts List
part
description
1
Housing
2
Handle Base
3
Handle Cover
4
Hinge
5
Hinge Pin
6
Door
7
Latch
8
Panel
9
PFC Inductor
10
Spool
11
Remote Control PCB
12
Wire Feed Mechanism
13
Foot Pedal Connector
14
Air Connector
15
Cover
16
Display PCB
17
Display
18
Screen Cover
19
Screen Frame
20
MIG Welding Gun
21
Front Handle Cover
22
Front Panel
23
Control Panel
24
Side Knob
25
Knob
26
Storage Door
27
Switch
28
Air Connector
29
Air Fitting
30
Quick Connector
31
Ground Clamp
32
Electrode Holder
Record product's Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
Page 46
Qty
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
For technical questions, please call 1-888-380-0318.
part
description
33
Wire Feed Connector
34
Air Connector
35
Output Inductor
36
Air Connector
37
Solenoid Valve
38
Base
39
Insulating Board
40
Main PCB
41
Control PCB
42
Fast Recovery Diode
43
Air Duct
44
Rectifier Radiator Bracket
45
Rectifier Radiator
46
Fan
47
Transformer
48
IGBT
49
Heatsink
50
Fast Recovery Diode
51
IGBT Radiator Bracket
52
IGBT Radiator
53
Bridge Rectifier
54
IGBT
55
IGBT Radiator
56
Fan
57
Threaded Y-connector
58
120 V AC Power Cord
59
Rear Panel
60
Rear Handle Cover
61
Power Connector
62
Overload Protector
63
Rear Panel
64
240 V AC Power Cord
Qty
1
1
1
3
2
1
1
1
1
6
1
1
1
1
1
2
1
2
1
1
2
4
2
1
1
1
1
1
1
1
1
1
Item 63621
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the OMNIPRO 220 and is the answer not in the manual?
Questions and answers
Inside the omnipro 220 where does the wire feed connector conect
The wire feed connector connects to the socket on the Wire Feed mechanism inside the Vulcan-Hart OMNIPRO 220.
This answer is automatically generated
cannot get wire auto feed to work
If the wire does not feed properly and the spool is stationary, turn off and unplug the welder. Slightly tighten the feed tensioner clockwise before retrying. To check the wire’s drive tension, feed the wire against a piece of wood from 2 to 3 inches away. If the wire stops instead of bending, unplug the welder, slightly tighten the feed tensioner clockwise, and try again. If the wire bends from the feed pressure, the tension is set properly. If needed, push the wire liner back into the gun.
This answer is automatically generated
My wire speed knob stopped working. I can't change the speed. What should I do or replace
How can I purchase internal parts ?
Some internal parts of the Vulcan-Hart OMNIPRO 220 are listed for illustration purposes only and are not available individually as replacement parts. There is no information provided on purchasing internal parts.
This answer is automatically generated