Siemens ACUSON Cypress Operator's Manual page 54

3-10
Setup Menu Fields
TABLE 4.
Field
Save
Stress Echo
Printer
Eject MO on
Shutdown
ACUSON Cypress™ Operator's Manual
Description
The Save options include:
Save Time Limit: Sets the number of seconds to
be captured when the •
• key can be set to capture 4, 8, 16, or 32 sec-
SAVE
onds of data. •
SAVE
the Time-Motion display in M-Mode and one frame
of the spectral display in the Doppler modes.
QSAVE Cycle Limit: Sets the number of cardiac
cycles to be captured when
key can be set to capture 1, 2, or 3 cardiac
Q SAVE
cycles when the patient's
on the screen. When an
button will capture 2, 4, or 6 seconds of
Q SAVE
data. Note that
Q SAVE
the Time-Motion display in M-Mode and one frame
of the spectral display in the Doppler modes.
Lock Studies: Sets the status of a study once it is
deactivated. Options include:
Never — Changes can be made to the studies at
any time.
After ## Hours — Use the trackball to place the
cursor in the box and type the number of hours after
which the study will automatically lock.
Once Deactivated — Studies are locked as soon
as they are deactivated.
When Enabled, the captured loops will include the
entire heart cycle (i.e., Full Cycle Capture) instead of
being limited to ~360 ms (systole). Click the checkbox
to enable (the default setting is disabled).
Designates the printer. The Active window displays
the current printer. To install a new printer, click [
] and select a printer driver.
PRINTER
Sets the Cypress to eject an MO disk during Shut-
down. To automatically eject an MO disk during the
Shutdown process, click Enabled. To turn automatic
eject off, click Disabled.
key is pressed. The
SAVE
will capture only one frame of
is pressed. The
Q SAVE
is properly displayed
ECG
is not displayed, the
ECG
captures only one frame of
Basic Setup
NEW