Ethernet Setting Of Screen Design Software; Overlap Window Setting Of Screen Design Software; Simple Motion Module; Start I/O Number Of Module - Mitsubishi Electric MELSEC-Q Series Manual

3.3 Ethernet Setting of Screen Design Software

Host Net No.
1
1 *

3.4 Overlap Window Setting of Screen Design Software

[Close the window when switching base screens] of [Detail Setting] for overlap window in [Screen
Switching/Window] is enabled to close the window when switching base screens.

4. SIMPLE MOTION MODULE

4.1 Start I/O Number of Module

The module's start I/O number is set to 0H. For more details about changing the start I/O number, please refer to
"7.1 Changing Start I/O Number".

5. SCREEN SPECIFICATIONS

5.1 Display Language

The language of the text displayed on the screen can be switched between Japanese, English, and Chinese
(Simplified). The text strings in each language are registered in the columns No. 1 to No. 3 in the comment group No.
500 as shown below. When the column No. is set in the language switching device, the language corresponding to
the column No. will appear.
Column No.
1
2
3

5.2 Screen Transition

5.2.1

Screen List/Transition (common)

Window screen W-30003: Clock Setting
System Alarm
Base screen
(B-30001 Menu and other base screens)
Station Unit Type
1 QnUD(P)V/QnUDEH
Language
English
Japanese
Chinese (Simplified)
IP Address
192.168.3.39
Window screen W-30002: Language Setting
Window screen W-30001: Alarm Reset
6/35
Port No. Communication
5006
UDP
BCN-P5999-0176-2a