Manual USB Driver Installation
Before you start!
If an error occurs during installation of the USB driver
1
Check the device manager.
Windows 98SE: Control Panel
Device Manager
Windows 2000 / XP: Control Panel
➝
System
Hardware
2
Check if there is a device listed with an
exclamation point or a question mark
(displayed as unknown device or
USB device).
3
Double click on the device listed with an
exclamation point or a question mark.
If you are using Windows 2000 and your version of Windows does not recognize the USB driver please
I
download and install the latest service pack from windowsupdate.microsoft.com
NOTE
The installation method may vary depending on the type of PC or operating system.
I
Contact your PC dealer or service center for installation information.
If errors occur continuously when you install the USB driver, reconnect the USB cable after
I
rebooting your system.
Insert the installation CD in the CD-ROM drive.
I
➝
System
➝
➝
Device Manager
Install the USB driver manually if it could
not be installed automatically or an error
occurred during installation.
➝
81
Need help?
Do you have a question about the YP-T9 and is the answer not in the manual?
Questions and answers