Lenze 8400 Communications Manual page 82

E84AYCER communication manual (PROFINET)
Parameter reference
Parameters of the communication module
C13853
Parameter | Name:
C13853 | All words from standard device
Display of the process data words 1 ... 16, which are transmitted from the controller to the IO controller.
Display range
(min. value | unit | max. value)
0
Subcodes
C13853/1
...
C13853/16
Read access
C13860
Parameter | Name:
C13860 | Settings
Display range
(min. value | unit | max. value)
0
Subcodes
C13860/1
C13860/2
C13860/3
C13860/4
Read access
C13861
Parameter | Name:
C13861 | Bus status
Bit-coded display of current bus status
Value is bit-coded:
Bit 0 Initialised
Bit 1 Online
Bit 2 Connected
Bit 3 Address conflict
Bit 4 Hardware error
Bit 5 EEPROM error
Bit 6 Watchdog error
Bit 7 Protocol error
Bit 8 Profinet stack ok
Bit 9 Profinet stack not configured
Bit 10 Ethernet controller error
Bit 11 UDP stack error
Bit 12 Reserved
Bit 13 Reserved
Bit 14 Reserved
Bit 15 Reserved
Read access
82
Write access CINH PLC-STOP
Write access CINH PLC-STOP
Write access CINH PLC-STOP
L
65535
Information
No transfer PDO_MAP_RX PDO_MAP_TX
255
Information
Reserved
Number of process data words
Reserved
Reserved
No transfer PDO_MAP_RX PDO_MAP_TX
No transfer PDO_MAP_RX PDO_MAP_TX
Data type: UNSIGNED_16
Index: 10722 = 29E2
d h
COM MOT
Data type: UNSIGNED_8
Index: 10715 = 29DB
d h
COM MOT
Data type: BITFIELD_16
Index: 10714 = 29DA
d h
COM MOT
EDS84AYCER EN 2.0 - 11/2010