Flexelements; Transducer Inputs/Outputs - GE T35 Instruction Manual

6 ACTUAL VALUES
!"
PATH: ACTUAL VALUES METERING
# FLEXELEMENT 1
#
The operating signals for the FlexElements™ are displayed in pu values using the following definitions of the base units.
Table 6–2: FLEXELEMENT™ BASE UNITS
dcmA
FREQUENCY
PHASE ANGLE
POWER FACTOR
RTDs
SOURCE CURRENT
SOURCE POWER
SOURCE VOLTAGE
XFMR DIFFERENTIAL CURRENT
(Xfmr Iad, Ibd, and Icd Mag)
XFMR DIFFERENTIAL
HARMONIC CONTENT
(Xfmr Harm2 Iad, Ibd, and Icd Mag)
(Xfmr Harm5 Iad, Ibd, and Icd Mag)
XFMR RESTRAINING CURRENT
(Xfmr Iar, Ibr, and Icr Mag)
!"
PATH: ACTUAL VALUES METERING
# DCMA INPUT xx
#
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed Channel ID
and the bottom line as the value followed by the programmed units.
!"
PATH: ACTUAL VALUES METERING
# RTD INPUT xx
#
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed Channel ID
and the bottom line as the value.
GE Multilin
!" !

FLEXELEMENTS

FLEXELEMENT 1(16)
FLEXELEMENT 1
OpSig: 0.000 pu
BASE = maximum value of the
DCMA INPUT MAX
under the +IN and –IN inputs.
f = 1 Hz
BASE
ϕ
= 360 degrees (see the UR angle referencing convention)
BASE
PF = 1.00
BASE
BASE = 100°C
I = maximum nominal primary RMS value of the +IN and –IN inputs
BASE
P = maximum value of V
BASE BASE
V = maximum nominal primary RMS value of the +IN and –IN inputs
BASE
I = maximum primary RMS value of the +IN and -IN inputs
BASE
(CT primary for source currents, and transformer reference primary current for transformer
differential currents)
BASE = 100%
I = maximum primary RMS value of the +IN and -IN inputs
BASE
(CT primary for source currents, and transformer reference primary current for transformer
differential currents)
!"
TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
!"
TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
T35 Transformer Management Relay
setting for the two transducers configured
× I
for the +IN and –IN inputs
BASE

6.3.6 TRANSDUCER INPUTS/OUTPUTS

!
DCMA INPUT xx
!
RTD INPUT xx
6.3 METERING
6.3.5 FLEXELEMENTS™
6-15
6