Rf Squelch - Yaesu FT-65R Advance Manual
Dual band transceiver
Hide thumbs
Also See for FT-65R:
- Quick start manual ,
- Operating manual (52 pages) ,
- Instruction manual (22 pages)
Table of Contents
Advertisement
RF Squelch
A special RF Squelch feature may be set so that only signals exceeding a certain S-meter
level will open the squelch.
1. Press and hold the F key to enter the Set Mode.
2. Press the [▲] or [▼] key to select Set Mode Item
"26 RF SQL".
3. Press the F key to enable adjustment of this item.
4. Press the [▲] or [▼] key to select the desired signal strength level for the squelch
threshold (S-1, S-2, S-3, S-4, S-5, S-6, S-8, S-FULL, or OFF).
5. Press the PTT switch to save the new setting and return to normal operation.
FT-65R/FT-65E Advance Manual
4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FT-65R and is the answer not in the manual?
Questions and answers
Factory reset
The provided context mentions that performing a factory reset on the Yaesu FT-65R can revert expanded TX settings, but it does not provide the exact steps for a factory reset. The manual reference suggests an "All Reset" procedure, which clears all settings, including passwords and memories. However, the exact steps to perform a factory reset are not detailed in the context.
This answer is automatically generated