Cloning - Yaesu FT-65R Advance Manual
Dual band transceiver
Hide thumbs
Also See for FT-65R:
- Quick start manual ,
- Operating manual (52 pages) ,
- Instruction manual (22 pages)
Table of Contents
Advertisement
Cloning
The FT-65R/E includes a convenient "Clone" feature, which allows the memory and
configuration data from one transceiver to be transferred to another FT-65R/E. This can
be particularly useful when configuring a number of transceivers for a public service
operation. Here is the procedure for cloning data from one transceiver to another:
1. Turn both transceivers OFF.
2. Connect the optional SCU-36 Cloning Cable between the MIC jacks of the two trans-
ceivers.
3. Press and hold the MONI/T.CALL key and the PTT switch simultaneously, while turn-
ing the transceiver ON.
Do this for both transceivers (the order of switch-on does not matter).
4. Press the [▲] or [▼] key on each transceiver to select "F9 : CLONE", then press the
F key momentarily.
When the Clone mode is successfully activated in this
step, "CLONE" message will appear on the displays of
both transceivers.
5. Press the PTT switch on the Source transceiver.
• "- - TX - -" will appear on the Source transceiver, and
the data from this transceiver will be transferred to
the destination transceiver.
• "- - RX - -" will appear on the destination transceiver.
• The data from the source transceiver will be transferred
to the destination transceiver.
6. If there is an error during the cloning process, "CLONE
ERR" will be displayed. Check the cable connections
and battery voltage, and try again.
7. If the data transfer is successful, "CLONE OK" will appear on both displays.
8. Turn both transceivers off and disconnect the cloning cable.
FT-65R/FT-65E Advance Manual 34
MIC Jack
SCU-36 (optional)
MIC Jack
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FT-65R and is the answer not in the manual?
Questions and answers
Factory reset
The provided context mentions that performing a factory reset on the Yaesu FT-65R can revert expanded TX settings, but it does not provide the exact steps for a factory reset. The manual reference suggests an "All Reset" procedure, which clears all settings, including passwords and memories. However, the exact steps to perform a factory reset are not detailed in the context.
This answer is automatically generated