Setting The Indoor Unit Addresses - Samsung AC026MNJDKH/EU Service Manual

1 Check whether the air conditioner operates in accordance with the option values you have set:
a Reset the indoor or outdoor unit.
• Indoor unit : Press the
• Outdoor unit : Press the K3 button.
b Remove the batteries from the remote control, insert them again, and then press the
remote control.

4-1-2 Setting the indoor unit addresses

Option No. for an indoor unit address: 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Before installing an indoor unit, be sure to set an address for the indoor unit by taking the following steps:
1 Make sure that the power is supplied to the indoor
unit. If the indoor unit is not plugged in, it must
include a power supply.
2 Set an address for each indoor unit using the remote control, according to your air conditioning system plan, by
referring to the following table and by following the steps in Common steps for setting the addresses and options on
page <?>.
• The indoor unit addresses (main and RMC addresses) are set to 0A0000-100000-200000-300000 by default.
• If indoor units and outdoor units match 1:1, you don't need to set the main address because it is automatically set
by the outdoor unit.
• If you are using on or off controller, set RMC address.
Option SEG1
Function Page
Indication Details
Indication
and details
0
Option SEG7
Function Page
Indication Details
Indication
and details
1
4-6
(Set) and (Low Fan) buttons on the remote control simultaneously for 4 seconds.
SEG2
Mode Setting main address
Indication Details Indication
0
A
1
SEG8
Setting RMC address
Indication
Reserved
0
1
SEG3 SEG4
Details
Reserved
No main
address
Main address
setting mode
SEG9 SEG10
Details
Reserved
No RMC
address
RMC address
setting mode
(Power) button on the
Indoor Unit
SEG5 SEG6
Indoor unit
number
Indication Details
Reserved
0 to 9
SEG11 SEG12
Group channel
Group address
(x16)
Indication Details Indication Details
RMC1 0 to 2 RMC2
Samsung Electronics
Units
digit
0 to F