Show Hardware Flow Sampler - Cisco Nexus 7000 Series Reference Manual

show hardware flow sampler

show hardware flow sampler
To display information about sampled NetFlow hardware flows, use the show hardware flow sampler
command.
Syntax Description all
count
index number
name sampler-name
vdc vdc-name
detail
module slot-number
instance instance
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow before you can use the
show hardware flow sampler command.
This command does not require a license.
Examples
This example shows how to display the NetFlow sampler table utilization for module 2:
switch# show hardware flow sampler count module 2
Sampler Table Utilization: about
Cisco Nexus 7000 Series NX-OS System Management Command Reference
508
show hardware flow sampler {all | count | index number | name sampler-name | vdc vdc_id}
[detail] [module module] [instance instance]
Specifies all sampled NetFlow hardware flows.
Specifies the sampler table utilization.
Specifies the sampler table index, in hexidecimal. The range is from 0x0 to
0x3ff.
Specifies the sampler name. The name can be any case-sensitive,
alphanumeric string up to 64 characters.
Specifies the virtual device context (VDC) name. The VDC name can be any
case-sensitive, alphanumeric string up to 64 characters.
(Optional) Displays detailed information about the flows.
(Optional) Displays information that is specific to a module.
(Optional) Displays the instance number.
Modification
This command was introduced.
0.00% (0/64)
Show Commands
OL-25806-03