system standby manual-boot
system standby manual-boot
To display the standby manual-boot status, use the system standby manual-boot command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the standby manual-boot status:
switch(config)# system standby manual-boot
system standby manual-boot option enabled
switch(config)#
Related Commands
Command
system startup-config
init
Cisco Nexus 7000 Series NX-OS System Management Command Reference
416
system standby manual-boot
Modification
This command was introduced.
Description
Initializes the startup configuration.
S Commands
OL-25806-03