Remote-Span - Cisco Nexus 7000 Series Reference Manual

R Commands

remote-span

To specify a remote Ethernet Switched Port Analyzer (RSPAN) VLAN as a SPAN session source, use
the remote-span command. To remove an RSPAN VLAN as a SPAN session source, use the no form of
this command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Vlan configuration (config-vlan)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to configure an RSPAN VLAN as a SPAN session source:
switch(config)# vlan 100
switch(config-vlan)# remote-span
This example shows how to remove an RSPAN VLAN configuration:
switch(config-vlan)# no remote-span
switch(config-vlan)#
Related Commands Command
monitor session
OL-25806-03
remote-span
no remote-span
Modification
This command was introduced.
Description
Enters the monitor configuration mode.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
remote-span
353